LC (LSP) = 600 mm · forks serially bolted on · incl. solenoid valve

One-sided loading of trucks requires a usable length of 1300 mm with 950 mm stroke.
The handling of 2 Euro pallets lengthwise requires a usable length of 1350 mm with 1000 mm stroke.

* Fork shoe reinforced in the rear area (10 mm wider)

* Wear resistant strips of manganese steel on bottom surface of outer forks, dimension S increases by 5 mm - on request
Pallet stops A1 (located on each side of the fork shoe) or pallet stops A2 (height 400 mm) - on request
Pallet stops A3 (height 850 mm) - on request
Integral design - on request
Different load capacities and versions available on request.

Camera system on request

Standard values for residual load capacity of lift trucks**

** The load capacity applies to lifting heights up to 3300 mm; specifications for greater lifting heights on request.
* Assumed dimensions

- For greater load centers, where the lift truck has a higher residual load capacity than the attachment, those values, upon the exceedance of which the attachment would be overloaded, are indicated in brackets ( ).

Fork Positioners ZVP-Series with Telescopic Forks
2 hydraulic functions

LC (LSP) = 600 mm · forks serially bolted on

One-sided loading of trucks requires a usable length of 1300 mm with 950 mm stroke.
The handling of 2 Euro pallets lengthwise requires a usable length of 1350 mm with 1000 mm stroke.

* Fork shoe reinforced in the rear area (10 mm wider)
* Wear resistant strips of manganese steel on bottom surface of outer forks, dimension S increases by 5 mm - on request

Pallet stops A1 (located on each side of the fork shoe) or pallet stops A2 (height 400 mm) - on request
Pallet stops A3 (height 850 mm) - on request

Camera system on request

Standard Values for residual load capacity of lift trucks**

** The load capacity applies to lifting heights up to 3300 mm; specifications for greater lifting heights on request.
* Assumed dimensions

- For greater load centers, where the lift truck has a higher residual load capacity than the attachment, those values, upon the exceedance of which the attachment would be overloaded, are indicated in brackets ( ).

Fork Positioners ZVP-Series with Telescopic Forks and Separate Sideshift
2 hydraulic functions + solenoid valve

LC (LSP) = 600 mm - Forks serially bolted on - incl. solenoid valve

One-sided loading of trucks requires a usable length of 1300 mm with 950 mm stroke.
The handling of 2 Euro pallets lengthwise requires a usable length of 1350 mm with 1000 mm stroke.

* Fork shoe reinforced in the rear area (10 mm wider)
* Wear resistant strips of manganese steel on bottom surface of outer forks, dimension S increases by 5 mm - on request

Pallet stops A1 (located on each side of the fork shoe) or pallet stops A2 (height 400 mm) - on request
Pallet stops A3 (height 850 mm) - on request
Camera system on request

Standard Values for residual load capacity of lift trucks**

** The load capacity applies to lifting heights up to 3300 mm; specifications for greater lifting heights on request.
* Assumed dimensions

- For greater load centers, where the lift truck has a higher residual load capacity than the attachment, those values, upon the exceedance of which the attachment would be overloaded, are indicated in brackets ( ).

Fork Positioners ZVKG-Series with Telescopic Forks
2 hydraulic functions

Large opening range · LC (LSP) = 600 mm · forks serially bolted on

One-sided loading of trucks requires a usable length of 1300 mm with 950 mm stroke.
The handling of 2 Euro pallets lengthwise requires a usable length of 1350 mm with 1000 mm stroke.

* Fork shoe reinforced in the rear area (10 mm wider)
* Wear resistant strips of manganese steel on bottom surface of outer forks, dimension S increases by 5 mm - on request

Pallet stops A1 (located on each side of the fork shoe) or pallet stops A2 (height 400 mm) or for pallet stops A3 (height 850 mm) - on request
Integral design, on request
Different load capacities and versions available on request

Standard values for residual load capacity of lift trucks**

** The load capacity applies to lifting heights up to 3300 mm; specifications for greater lifting heights on request.
* Assumed dimensions

- For greater load centers, where the lift truck has a higher residual load capacity than the attachment, those values,
upon the exceedance of which the attachment would be overloaded, are indicated in brackets ( ).

Fork Positioners ZVKG-Series with Telescopic Forks and Separate Sideshift
2 hydraulic functions + solenoid valve

Large opening range · LC (LSP) = 600 mm · forks serially bolted on · incl. solenoid valve

One-sided loading of trucks requires a usable length of 1300 mm with 950 mm stroke.
The handling of 2 Euro pallets lengthwise requires a usable length of 1350 mm with 1000 mm stroke.

* Fork shoe reinforced in the rear area (10 mm wider)
* Wear resistant strips of manganese steel on bottom surface of outer forks, dimension S increases by 5 mm on request

Pallet stops A1 (located on each side of the fork shoe) or pallet stops A2 (height 400 mm) or for pallet stops A3 (height 850 mm) on request
integral design, on request
Different load capacities and versions available on request.

Standard values for residual load capacity of lift trucks**

** The load capacity applies to lifting heights up to 3300 mm; specifications for greater lifting heights on request.
* Assumed dimensions

For greater load centers, where the lift truck has a higher residual load capacity than the attachment, those values, upon the exceedance of which the attachment would be overloaded, are indicated in brackets ( ).