Standard applications

Forks are the combining element between the load and the forklift truck. They are the most stressed segments of an attachment and should thus meet highest quality stan ...

Carpet poles with small diameters made of solid material are used for handling carpet rolls. Two different materials are processed here (42CrMo4 or 30 ...

Crane jibs are designed for handling suspended loads. The telescopable version can be used for many different applications, even in locations with a limited amount of ...

Bulk buckets are used for handling and transporting bulk goods such as sand, grain, fertilizer, potatoes or similar goods. The goods may not be picked up below floor l ...

In many areas of logistics and warehousing technology, telescopic forks are used in order to facilitate one-sided loading and unloading of trucks or storage in double ...

Snow plows are used for removing snow from large areas and paths.

They are mounted by means of fork pockets that are secured with clamping screws. The shields ...

Multiple load handlers allow simultaneous handling of several pallets, which, in comparison to the common handling of one pallet, makes transportation operations more ...

Hydraulic rotators are used for sideward emptying in all areas of industry.

The continuous rotation range is 360°. The attachment is driven by means of a worm ...

Tilting carriages can also be seen as tiltable front carriages.
By means of cylinders, the fork carriage is tilted forward 45°. The fork carriage allows mountin ...

This attachment has been constructed for bulk boxes with frontal bottom discharge. The drop-bottom box dumper is installed on the fork carrier between the existing for ...

Fork positioners enable hydraulic positioning of forks. These attachments are used in particular for frequently changing load widths.

Due to the sturdy frame c ...

Fork clamps allow forks to be adjusted beyond the width of the lift truck. Due to their robust construction and appropriate cylinders with check valve ...

The blade of a pivoting fork clamp can be manually pivoted by 90°.
In the 0° position, the attachment can be used as standard forks, in the 90° position, clos ...

The fixed fork spreader has been designed for the occasional handling of particularly long and instable loads such as plastic tubes, sheet metal board etc. The fork-mo ...

Bale clamps enable the handling of bales of pulp, paper and textiles.

Pulp bale clamps have solid, slim arms to facilitate ha ...

Carton and appliance clamps
are used for the palletless handling of pressure-sensitive electrical household appliances and consumer electronic e ...

Drum clamps enable frontal dumping of drums. Depending on the handling application, two different types are used. Type A is used if drums are freely a ...

Roll clamps are intended for handling cylindrical goods.

Paper roll clamps operate with one long hydraulica ...

Load stabilizers are used to stabilize and secure the goods to be handled, such as cardboard packaging, wood and metal sheet stacks.

The pressure frame is moun ...

Scrap grapples are used for handling large-volume bulk goods such as waste paper, waste fabric and remnants of fiber as well as steel, wood and plastic chips. There ar ...

Wood grapples secure logs against rolling off the forks. The arm opens up wide so that the attachment can also carry out fork handling. The double-arm version with kne ...

Pallet inverters are used for turning goods during the production process, for example, for turning coated boards upside down or for changing pallets.

Furtherm ...

Ladle side tippers are used for pouring liquid metal. The center of rotation is positioned near the ladle’s spout ensuring only slight movement of t ...

This system has been designed for lift trucks that are used for many different applications. The quick-coupling system allows interchanging different attachments quick ...