Stabau Massstab

    S5 Telescopic Forks

    Telescopic Forks (retractable and extendable under load)
    1 hydraulic function

    Teleskopgabeln (zum Ein- und Ausfahren mit Last)

    Integral synchronous system up to and including TGH 60

    Model Load
    capacity in kg    		 for lift
    trucks
    up to    		 ISO Cross
    section*
    DxS    		 C L K CoG 1/
    CoG 2
    ESP 1/
    ESP 2    		 Weight
    per
    pair
    600 1450 1750
    mm mm mm to mm mm mm mm mm mm kg
    1-Zylinder-Ausführung
    S 5 - TGHS 20 1200/850 2000 960 800 2,0/600 2 133x58 45 1200 850 420/625 160
    S 5 - TGHS 20 1350/1000 1350 1000 490/735 175
    S 5 - TGHS 25 1200/850 2500 1450 1200 2,5/600 2 133x63 50 1200 850 425/610 175
    S 5 - TGHS 25 1350/1000 1350 1000 495/720 195
    S 5 - TGHS 30 1200/850 3000 1450 1200 3,0/500 3 133x63 50 1200 850 405/585 185
    S 5 - TGHS 30 1350/1000 1350 1000 475/690 200
    2-Zylinder-Ausführung
    S 5 - TGH 25 1200/850 2500 1450 1200 2,5/600 2 163x58 45 1200 850 415/625 195
    S 5 - TGH 25 1350/1000 1350 1000 485/740 210
    S 5 - TGH 30 1200/850 3000 1450 1200 3,0/500 3 163x58 45 1200 850 400/600 205
    S 5 - TGH 30 1350/1000 1350 1000 465/710 220
    S 5 - TGH 40 1200/850 4000 1850 1550 3,5/600
    4,0/500    		 3 163x58 45 1200 850 400/600 205
    S 5 - TGH 40 1350/1000 1350 1000 465/710 220
    S 5 - TGH 48 1200/850 5000 2310 1920 5,0/600 3 165x64 50 1200 850 405/605 230
    S 5 - TGH 48 1350/1000 1350 1000 475/715 250
    S 5 - TGH 50 1200/850 5000 2310 1920 5,0/600 4 165x64 50 1200 850 370/550 255
    S 5 - TGH 50 1350/1000 1350 1000 430/655 275
    S 5 - TGH 60 1200/850 6000 3100 2560 6,0/600 4 217x67 50 1200 850 380/570 350
    S 5 - TGH 60 1350/1000 1350 1000 445/680 380
    S 5 - TGH 80 1200/850 8000 4300 3600 8,0/600 4 217x77 60 1200 850 380/550 415
    S 5 - TGH 80 1350/1000 1350 1000 445/650 450

    One-sided loading and unloading of trucks requires a usable length of 1350 mm with a stroke of 1000 mm.
    * Fork shoe reinforced in the rear area (10 mm wider)
    * Wear-resistant manganese strips are available below the outer fork, dimension S increases by 5 mm - available as an option
    Stops A 1 (each side of the fork back) or A 2 (400 mm high) or stops A 3 (reinforced and 850 mm high) - available as an option

    Load backrests (width 750 mm, height 1200 mm) incl. A 2 stops - available as an option
    Screwed telescopic forks e.g. for fork positoner - available as an option
    Camera systems - available as an option
    Cold store version - on request
    Ex-protection Version - on request
    Higher capacities and other cross sections on request.


    Stroke max. 1200 mm, fork length max. 2000 mm
    Fork positioner with telescopic forks also available

    Guide values for the residual load capacity of forklifts **

    Telescopic Forks S 5 - TGHS 20 TGHS 20

    TGH 25

    TGHS 25

    TGH 30

    TGHS 30

    		 TGH 40 TGH 40 TGH 48

    TGH 48

    TGH 48

    TGH 50

    		 TGH 60 TGH 80
    Load capacity
    lift truck    		 kg/mm 1800/500 2000/500 2500/500 3000/500 3500/500 4000/500 4500/500 5000/500 5000/600 6000/600 8000/600
    X* mm 400 450 450 450 500 500 500 500 560 560 650
    LC (LSP) = 600 mm kg 1570 1720 2170 2620 3130 3550 4000 4540 4940 5950 7900
    LC (LSP)= 750 mm kg 1360 1510 1900 2300 2760 3120 3520 3950 4370 5260 7050
    LC (LSP)= 1200 mm kg 940 1050 1330 1620 1980 2250 2530 2800¹ 2800¹ 3830 5250¹
    LC (LSP)= 1450 mm kg 810 910 1160 1410 1720 1850¹ 2210 2310¹ 2310¹ 3200¹ 4300¹
    LC (LSP)= 1750 mm kg 700 790 1000 1200 1500 1550¹ 1910 1920¹ 1920¹ 2650¹ 3600¹

    ** The load capacity applies to lifting heights up to 3300 mm; Specifications for greater lifting heights on request.
    * Assumed dimensions
    ¹ Load capacity of lift truck may be higher

    TELESCOPIC FORKS, LOAD EXTENDERS

    S5

    Download

    Datenblatt